0333 014 4340 Remote Support
FanvilMairdiVTContact Us

is earned by
doing difficult things well


How-To Videos

Get to know your Fanvil telephone!

This blog provides you with a range of how-to videos for your Fanvil phone.

How To Setup EHS On Your Fanvil Device

Do you know how to setup EHS? The following video will show you how to connect your wireless headset to your phone step by step:

    Step 1
  • Connect the single cable to the headset port on the back of the phone.
    • Step 2
  • Connect the larger connector to the AUX/EHS port on the headset base.
  • Connect the smaller connector to the telephone port on the headset base.
    • Step 3
  • On the phone go to: Menu – Features – EHS and change to PLANTRONICS.
  • Alternatively, from the web interface, go to phone settings- audio, and change EHS type to PLANTRONICS.
    • Result
  • EHS should now work on your Fanvil telephone.

  • If you’re still having issues connecting your wireless headset then do not hesitate to contact our office on 0333 014 4340.

    How To Enable Video On Your Fanvil X6

    See and learn how to use the video capability of your Fanvil X6 when connected to a Fanvil i30S door access device.

      Step 1
  • On the web interface go to Line – Video Codecs then change to H264. Once you have changed the video codecs, check over to make sure your new settings are correct.
    • Result
  • Video on your Fanvil X6 should now be enabled.
  • .

    How To Change Default Audio Output To The Headset On Your Fanvil Device

    This video provides you with the information needed to change the default audio output to the headset on your Fanvil device.

      Step 1
  • On the web interface go to Phone Settings and under Features tick ‘Auto Headset’.
  • Click apply, then check your auto headset as been enabled.
    • Result
  • Default audio to headset should now be enabled.